NEWS

Your location：

Lu Qing cable tells you how to install home improvement wires ----- regular wire connection

Categories:Industry dynamic
Author:
Origin:
Time of issue:2018-08-04
Views:6

(Summary description)1. Generally used for sockets are single-core 2.5 square wires, more than 3 horsepower single-core wires 4 square wires, single-core 6 square wires are used for the main incoming line, and two-color wires are used for the ground wire.

鲁青线缆告诉你家装电线安装方法-----电线正规接法





Lu Qing cable tells you how to install home improvement wires ----- regular wire connection

Categories:Industry dynamic
Author:
Origin:
Time of issue:2018-08-04
Views:6

Information

Formal wiring of home improvement wire installation method

1. Generally used for sockets are single-core 2.5 square wires, more than 3 horsepower single-core wires 4 square wires, single-core 6 square wires are used for the main incoming line, and two-color wires are used for the ground wire.

2. Three coils of different colors are used as a group (with zero wire, live wire, and ground wire). The single-core 1.5 square wires are used for lamps and lanterns, and two coils of different colors are used as a group (for zero wire and hot wire).

3. The two-core and three-core sheathed wires are used as open wires, and are mostly used for construction on the construction site.

4. The thicker the audio cable, the better. It is recommended to choose 2 * 1.5 2 or 2 * 1.2 specifications. 5. The more the TV splitter is divided, the worse the TV signal is.

I. DBJ08-20-98 stipulates that the electrical equipment of each household shall meet the following standards:

1. Each household must have a wall-mounted household power distribution box at the entrance. The household power distribution box is provided with a main power switch, which can cut off the phase line and the neutral line at the same time, and has a disconnection sign. Electricity meters should be set up in each house, and the meter box should be installed concealed in layers and concealed in public places. The main power switch in the household distribution box should use a two-pole switch. The total switch capacity selection should not be too large or too small; it is necessary to avoid the phenomenon of tripping at the same time as the sub-switch. The watt-hour meter box is usually installed on the public channel in layers and layers. This is to facilitate meter reading and management. The recessed wall installation is to not occupy the public channel.

Scan the QR code to read on your phone

Previous: None

Next: Use of cable and specification of model

Previous: None

Next: Use of cable and specification of model